WE-TECH green gas blowback Browning MK III Hi-power full metal airsoft pistol li

Description

The Browning Hi-Power has undergone continuous refinement by FN since its introduction. The pistols were originally made in two models: an "Ordinary Model" with fixed sights and an "Adjustable Rear Sight Model" with a tangent-type rear sight and a slotted grip for attaching a wooden shoulder stock. The adjustable sights are still available on commercial versions of the Hi-Power, although the shoulder stock mounts were discontinued during World War II. In 1962, the design was modified to replace the internal extractor with an external extractor, improving reliability.
Standard Hi-Powers are based on a single-action design. Unlike modern double-action semi-automatic pistols, the Hi-Power's trigger is not connected to the hammer. If a double-action pistol is carried with the hammer down with a round in the chamber and a loaded magazine installed, the shooter may fire the pistol either by simply squeezing the trigger or by pulling the hammer back to the cocked position and
then
squeezing the trigger. In contrast, a single-action pistol can only be fired with the hammer in the cocked position; this is generally done when a loaded magazine is inserted, and the slide cycled by hand. In common with the M1911, the Hi-Power is therefore typically carried with the hammer cocked, a round in the chamber and the safety catch on (a carry mode often called
cocked and locked
in the United States or "made ready" in the UK, or sometimes called
condition one
).
The Hi-Power, like many other Browning designs, operates on the short-recoil principle, where the barrel and slide initially recoil together until the barrel is unlocked from the slide by a cam arrangement. Unlike Browning's earlier Colt M1911 pistol, the barrel is not moved vertically by a toggling link, but instead by a hardened bar which crosses the frame under the barrel and contacts a slot under the chamber, at the rearmost part of the barrel. The barrel and slide recoil together for a short distance but, as the slot engages the bar, the chamber and the rear of the barrel are drawn downward and stopped. The downward movement of the barrel disengages it from the slide, which continues rearward, extracting the spent case from the chamber and ejecting it while also re-cocking the hammer. After the slide reaches the limit of its travel, the recoil spring brings it forward again, stripping a new round from the magazine and pushing it into the chamber. This also pushes the chamber and barrel forward. The cam slot and bar move the chamber upward and the locking lugs on the barrel re-engage those in the slide.
Just released by WE-TECH, the latest version on the Browning Hi-Power.The MK III has been updated to reflect the latest real steal design.
Features
Black Full metal alloy slide
Full Metal Black Lower
Green Gas Blowback Action
Green Gas Drop Free 20 rnd 6mm BB's Magazine
Firing Mode: semi automatic, safe
Adjustable Hopup
Integrated lanyard loop to help retain your pistol
Textured grip panels provide positive grip even in adverse conditions
Fixed front and rear sites match most military-issued versions of the real pistol
Ergonomic slide lock, mag release
ambidextrous safety all are easily controlled without stretching your hand
Listing Includes
1 WE-TECH Browning Hi power MK3 Black
1 WE-TECH Magazine green gas
1 WE-TECH owner Manual
Free USPS priority shipping with tracking US Puerto Rico and Hawaii
No international shipping
This replica gun contains the colored markings required by law, including a permanently attached orange plug."
Using metal BBs may jam or potentially damage the airsoft gun. In addition, it is strongly recommended the user only uses high quality airsoft BBs when operating their airsoft gun. Using low grade BBs may break inside the barrel and further damage the airsoft gun. It is highly recommended to refrain from using any BBs lighter than .20g with this airsoft gun. Using BBs lighter than .20g may break inside the barrel of the airsoft gun which may cause further damage to the airsoft gun itself. If you would like to achieve more range, it is recommended to use .20g plasti c BBs. If you would like more accuracy, it is recommended to use heavier BBs like .25g and above. It is important to note that the heavier the BB is, the more range is sacrificed. On the contrary, the lighter the BB is, the more accuracy is sacrificed.
Disclaimer / Warranty:
By purchasing this item, you will have read, agreed, verified and acknowledged to all the following conditions: You are at least 18 years of age. Your purchase complies with your local laws and regulations with respect to ownership of Airsoft replicas. You assume full responsibility of all liabilities, damages, injuries, and modifications done to product. You will not hold Gbbarmory (greg_land)., their owners, affiliates or employees responsible for any legal actions, liabilities, damages, penalties, claims, or other obligations caused by your ownership of Airsoft replicas. All Airsoft replicas are sold with a bright orange tip to comply with federal law and regulations.
Buyer will agree to practice basic Airsoft safety as followed: Eye protection must be worn at all times, never brandish the product in public, batteries must be unplugged after usage, and the rifle must be cleared of BBs in the chamber after use.
Thank You.
Disclaimer / Warranty:
By purchasing this item, you will have read, agreed, verified and acknowledged to all the following conditions: You are at least 18 years of age. Your purchase complies with your local laws and regulations with respect to ownership of Airsoft replicas. You assume full responsibility of all liabilities, damages, injuries, and modifications done to product. You will not hold Gbbarmory(greg_land) Airsoft Inc., their owners, affiliates or employees responsible for any legal actions, liabilities, damages, penalties, claims, or other obligations caused by your ownership of Airsoft replicas. All Airsoft replicas are sold with a bright orange tip to comply with federal law and regulations.
Buyer will agree to practice basic Airsoft safety as followed: Eye protection must be worn at all times, never brandish the product in public, batteries must be unplugged after usage, and the rifle must be cleared of BBs in the chamber after use